Parallels Virtualization and Automation Software

Ensim^® Pro for Windows 10.2.0 Hotfix 5 Release notes

Hotfix information

• Hotfix no: 5



• Hotfix date: 30-March-2007



• Applies to: Ensim Pro for Windows - 10.2.0

Download: http://download.swsoft.com/ensim/download/pro/windows/10.2.0/hotfix/5/EPW-10.2.0-Hotfix-5.zip

md5sum : a3e998190f46325ccab1870e7a994d36

Resolved Issues

This hotfix resolves the following issue.

• DNS subzone creation fails if site domain name and login suffix are different

        Issue: Site administrator can not add sub zones if site domain name and login suffix are different.

        Resolution: Site administrator can add sub zones.

Prerequisites

Time requirements and customer impact

It takes a few minutes to apply the hotfix. During this time, new customers cannot be provisioned, and Ensim Pro control panel is unavailable. 

Installing the hotfix

This section explains how to install the hotfix.

    Pre-installation instructions

Before installing the hotfix, you need to disable server applications. This section describes the pre-installation instructions.

1. Open a command window and run the command iisreset /stop.

The pre-installation procedure is complete.

    Installation instructions

        After performing the steps in the pre-installation section, complete the following steps to install the hotfix.

1. Unzip the hotfix zip file to a temporary directory.



2. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\msdns where <install_dir> refers to the path where Ensim Pro is installed.



3. Back up the existing DNSFrontend.dll file to a location other than the existing directory.
   
   Important: Do not rename the file and keep it in the current directory.



4. Copy the new DNSFrontend.dll from the temporary directory to the current directory.

    Post-installation instructions

After installing the hotfix as described in the preceding section, perform the following step to complete the hotfix installation.  

 

1.      Open a command window and run the command iisreset /start.

The hotfix installation is complete.

Removing the hotfix

    You can remove (or roll back) the installed hotfix by restoring the backed up DLL files    

        To roll back the hotfix installation:

1. Login to the server as administrator.



2. Open a command window and run the command iisreset /stop.



3. Restore the DNSFrontend.dll file from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\msdns where <install_dir> refers to the path where Ensim Pro is installed



4. Open a command window and run the command iisreset /start.

The hotfix rollback is complete.