Parallels

Ensim^® Pro for Windows 4.0.0 Hotfix 10 Release notes

Hotfix information

• Service: Ensim Pro for Windows - 4.0.0
• Hotfix no:10
• Hotfix date:11-April-2006

Download: http://download.swsoft.com/ensim/download/pro/windows/4.0.0/hotfix/10/WWP-4.0.0-Hotfix-10.zip
md5sum : 6524e2632a8163b1f1a56c44d8224640

Resolved Issues

This hotfix resolves the following issue.

• effect of export-import on MSDE userrights

Prerequisites

Before installing this hotfix, ensure that your Ensim Pro 4.0.0 for Windows system has the following:

• Ensim Pro for Windows 4.0.0 - hotfix 1, 2, 3, 4, 6, 7, 8, 9

Time requirements and customer impact

It takes a few minutes to apply the hotfix. During this time, new customers cannot be provisioned, and Ensim Pro control panel is unavailable. 

Installing the hotfix

This section explains how to install the hotfix.

Pre-installation instructions

Before installing the hotfix, you need to disable server applications. This section describes the pre-installation instructions.

1. Ensure that you have installed all hotfixes mentioned in the prerequisites section unless they are marked as optional.
2. Open a command window and run the command iisreset /stop.
3. Disable the EnsimProvisionEngine service by logging in to server as server administrator and performing the following steps:
       a. Click Start > Programs > Administrative Tools > then click Component Services.
       b. In the left navigation bar, expand Console Root > Component Services > Computers > My Computer > COM+ Applications
       c. Right-click EnsimProvisionEngine, then select Shut down

The pre-installation procedure is complete.

Installation instructions

After performing the steps in the pre-installation section, complete the following steps to install the hotfix.

1. Unzip the hotfix zip file to a temporary directory.
2. Change to the directory <install_dir>\cp\admin\bin\serviceComponents\msde where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin\serviceComponents\msde directory.
3. Back up the existing MSDEBackend.dll file to a location other than the existing directory.
   Important: Do not rename the file and keep it in the current directory.
4. Copy the new MSDEBackend.dll from the temporary directory to the current directory.

Post-installation instructions

After installing the hotfix as described in the preceding section, perform the following steps to complete the hotfix installation.

1.      Open a command window and run the command iisreset /start.

The hotfix installation is complete.

Removing the hotfix

You can remove (or roll back) the installed hotfix by restoring the backed up DLL files    

To roll back the hotfix installation:

1. Login to the server as administrator.
2. Open a command window and run the command iisreset /stop.
3. Stop the EnsimProvisionEngine COM+ component. Open Start > Programs > Administrative Tools > Component Services
   Navigate to : Computers > My Computer > COM+ Applications > EnsimProvisionEngine. Right Click > Shut Down
4. Restore the MSDEBackend.dll file from the backup location to the directory <install_dir>\cp\admin\bin\serviceComponents\msde where <install_dir> refers to the path where Ensim Pro is installed. For example, if Ensim Pro is installed in C:\Program Files\Ensim\WEBppliance, then switch to C:\Program Files\Ensim\WEBppliance\cp\admin\bin\serviceComponents\msde directory.
5. Open a command window and run the command iisreset /start.

The hotfix rollback is complete.